Pure DrawerWallet Large

€50,00

Taxes included. Shipping calculated at checkout.

Card slots 6 8 10

Colorblack

2 left

DrawerWallet is a rigid wallet with a satisfying sliding mechanism and minimalist design. Slide the front plate up - cards fan out instantly. No digging, no fumbling. Small enough to disappear in your pocket - perfect for everyday carry.

Holds 6, 8, or 10 cards in the main compartment. Most slim wallets drop coins to stay small - the drawer keeps them without adding bulk, alongside folded banknotes, up to 9 extra cards, or anything else you still need to carry. Opens with a single finger push.

The rigid PETG shell keeps the same compact size regardless of how full it is. This material has similar stiffness to PVC and PC - the materials most cards are made from - and is itself increasingly used in card production, so the wallet and cards don't wear each other down. Built to last, and to keep your cards lasting too.

The Pure edition strips it down to the essentials - no gimmicks, no patterns, just clean geometry.

8 mm drawer
made from PETG polymer
DW-6L | 60.4 × 109 × 21 mm | 73 g
DW-8L | 60.4 × 109 × 23 mm | 76 g
DW-10L | 60.4 × 109 × 24.6 mm | 78 g

Designed and made in Poland, EU.

Drawer height: large - 8 mm
Drawer holds: up to 9 cards, tracking card, folded banknotes, coins, keys etc.
Main material: PETG

DW-6L

Card slots: 6 (with 1 embossed)
Dimensions: 60.4 x 109 x 21 mm
Mass: 73 g

DW-8L

Card slots: 8 (with 1 embossed)
Dimensions: 60.4 x 109 x 23 mm
Mass: 76 g

DW-10L

Card slots: 10 (with 1 embossed)
Dimensions: 60.4 x 109 x 24.6 mm
Mass: 78 g

Avoid prolonged exposure to temperature above 60°C.

If outer surfaces become greasy and slippery, use a bit of water with soap or IPA, then wipe it dry.

Caution: filling the whole drawer with only coins significantly increases the weight and poses a risk of the drawer opening while shaken.

Usage:

Hold the wallet in both hands, with the logo on the bottom, place the thumbs on the front plate and slowly slide the front plate upwards to expose the cards.
Open the drawer by pushing in the opening with the index finger. Try not to squeeze the bottom of the wallet while doing so.

We are using cutting edge machines and perfect every detail of the design.
Layer lines and minor surface imperfections do not impact the functionality and are considered normal characteristics of 3D printed items.